Galfer 1054 Semi-Metallic Carbon Compound:
Can be used for sport, touring and commuting applications
Works well in wet conditions as well as in cold brake conditions
Withstands abrupt temperature changes allowing for a quick feel return
NOTE: All Galfer brake pads must be properly BEDDED-IN to achieve maximum output and reduce unnecessary rotor wear.
Galfer strongly recommends following these BED-IN directions:
1. Clean the brake rotor(s) with thin sand paper and water prior to new pad installation.
2. Towel dry the rotor surface after sanding.
3. Install the new pads and be easy with the brakes for the next 40-50 miles.
Product Series
